Engineered for the aircraft industry, the TARGET stud driver drives stud by pitch diameter pressure instead of pressure on the top of the stud. Eliminates mutilation of threads and distortion of cotter keyholes.

Use a fixtured power set-up, any and held reversible power tool (except impact wrench), or a T-Handle.

Stud Capacities: available from #10 thru 5/8″. Some metric sizes available from stock; others quoted on request.

Similar to TYPE G and COMPAC stud drivers but incorporates an adjustable sleeve for applications on which a variable length of stud grip is desired.

Stud Capacities: available from #10 thru 9/16″ and M6 thru M14.

Same basic design as TYPE G stud driver but shorter overall tool length and lighter weight.

Stud Capacities: available from #8-32 thru 1/2″-20 and M4 thru M12.

TITAN ‘TYPE G SERIES™’ STUD DRIVER

Positive drive for applications where restricted space does not permit use of bigger diameter automatic self-releasing tools. Loose plunger design assures quick release of stud upon reversal of power spindle. Easily adapts to TITANTORKER or TORQUETTE clutches for applications requiring torque control.

Use with any reversible air or electric drill (except impact wrench), either hand held or on fixtured assembly machines.

Stud Capacities: available from #6-32 thru 3/4″-16 and M5 thru M20.

Ideal for wheel and axle plants, locomotive shops, and plants building air compressors and similar heavy equipment. Definitely stands up under extreme vibration of impact wrenches.

Stud Capacities: available from 1/4″ thru 3″ (NC and NF) and M6 thru M33 (ISO). Larger sizes quoted on request.

TITAN ‘BULL DOG®’ PIPE NIPPLE DRIVER

Same basic tool as BULL DOG stud driver but designed to drive threaded pipe nipples.

A necessity where limited amount of torque is desired — as in driving shoulder studs or bottoming studs. Opens automatically when lifted from stud and does not need to reverse direction. Torque setting is easily adjustable.

Stud Capacities: available from 3/8″ thru 1-1/8″ and M10 thru M30.

Torque Range: adjustable from 60 inch-pounds thru 225 foot-pounds (7 thru 305 Nm), depending on tool size.

POSI-LOAD® stud retainer: available for applications where pre-loading of stud into stud driver would be beneficial.

Drives stud to a predetermined projection height above casting, causing stud to tighten on the pitch diameter interference between stud and casting. Opens automatically at the required projection and does not need to reverse direction.

Use on any fully or semi-automatic assembly machine or on any power hand tool (except impact wrench).

Stud Capacities: available from 3/8 thru 1-1/8″ and M10 thru M30.

AUTO-LOAD® gage: available for applications where pre-loading of stud into stud driver would be beneficial.

A necessity where limited amount of torque is desired — as in driving shoulder studs or bottoming studs. Opens automatically when lifted from stud and does not need to reverse direction. Torque setting is easily adjustable. The newly patented ‘micro-desig’ permits its use on many close clearance applications. Incorporates new ‘cartridge’ assembly concept for fast, easy maintenance.

Use on any fully or semi-automatic assembly machine or on any power hand tool (except impact wrench).

Stud Capacities: available from #8-32 thru 7/16″ and M4 thru M10. Torque Range: adjustable from 0 inch-pounds thru 50 foot-pounds (0 thru 68 Nm), depending on tool size.

POSI-LOAD® stud retainer: available for applications where pre-loading of stud into stud driver would be beneficial.

Drives stud to a predetermined projection height above casting, causing stud to tighten on the pitch diameter interference between stud and casting. Opens automatically when lifted from stud and does not need to reverse direction. ‘Micro-design’ permits its use on many close clearance applications.

Use on any fully or semi-automatic assembly machine or on any power hand tool (except impact wrench).

Stud Capacities: available from #8-32 thru 7/16″ and M4 thru M10.

AUTO-LOAD® gage: available for applications where pre-loading of stud into stud driver would be beneficial.